Assessment of potential impacts of municipal solid waste treatment alternatives by using life cycle approach: a case study in Vietnam

In Vietnam, most of municipal solid waste (MSW) is disposed of at open dumping and landfill sites, and the methane gas from waste is the un-ignorable source of greenhouse gas (GHG) emission. It is indispensable to explore the possibility for GHG mitigation in MSW management. The objective of this study was to estimate alternative waste treatment practices towards the GHG emission mitigation, energy consumption and generation, reduction of landfill volume, and various benefits for proposing the appropriate selection by scenario analyses for representative Vietnam’s cities. Impacts were calculated by utilizing life cycle assessment (LCA) method. A literature review survey on the current applicability of LCA database for assessing impacts from waste sector in developing countries, especially for Vietnam, was carried out. This study assessed the contribution of alternative solid waste treatment practices. The result showed that, except investment and operation costs, incineration with energy recovery seems the suitable alternative for treating waste from representative cities of Vietnam according to reduction of GHG emission and waste burden to landfill sites and energy recovery and generation. Besides, MSW composition was identified as an important factor directly influencing to impacts as well as other products and benefits of waste treatment alternatives. Reliable data on waste composition are indispensable for assessing to choose, improve, or plan the waste treatment practices towards sustainable development.     

The status and distribution of PCBs along the coast of Vietnam

Environmental Geochemistry and Health - Polychlorinated biphenyls (PCBs), well-known as an important scientific achievement, are now considered as one of the most persistent organic pollutants...     

The evolving local social contract for managing climate and disaster risk in Vietnam

How do disasters shape local government legitimacy in relation to managing climate‐ and disaster‐related risks? This paper looks at how local authorities in Central Vietnam perceive their social contract for risk reduction, including the partial merging of responsibilities for disaster risk management with new plans for and investments in climate change adaptation and broader socioeconomic development. The findings indicate that extreme floods and storms constitute critical junctures that stimulate genuine institutional change. Local officials are proud of their strengthened role in disaster response and they are eager to boost investment in infrastructure. They have struggled to reinforce their legitimacy among their constituents, but given the shifting roles of the state, private sector, and civil society, and the undiminished emphasis on high‐risk development models, their responsibilities for responding to emerging climate change scenarios are increasingly nebulous. The past basis for legitimacy is no longer valid, but tomorrow's social contract is not yet defined.     

Organic certification for shrimp value chains in Ca Mau,Vietnam: a means for improvement or an end in itself?

Eco-certification has been used as a tool to mitigate adverse effects of aquaculture production and might thus be understood as a private approach to sustainable ecosystem management. In production forests in Ca Mau, Vietnam, where mangrove have suffered degradation despite legal protection, different projects have targeted reversing this trend by means of private certification using the ‘Naturland’ organic standard as a reference. So far the outcomes have, however, been proven unsatisfactory. With the aim to better understand the reasons for these poor outcomes, a survey of forty households was conducted in a production forest in Rach Goc commune, Ngoc Hien District. We evaluated farmers’ perceptions on mangrove management, the drivers guiding shrimp farming, and whether there was a difference between participants and non-participants in a former ‘Naturland’ organic project. To complement the survey, a range of stakeholders involved in shrimp value chains were interviewed to better understand the terms and benefits of certification. The results of this survey suggested that, when applied to shrimp–mangrove farming systems in production forests in Ca Mau, ‘eco-certification’ and associated benefits are not very satisfactory. The survey results revealed that certified farms do not show significant differences to non-certified farms in terms of social and environmental benefits. As far as the implementation process was concerned, the survey results showed that a failure to integrate local farmers as participants consequently resulted in households becoming ‘objects’ for certification and not project partners with equal weight and power. It appears that rather than being a tool for improvement, ‘Naturland’ certification for shrimp–mangrove farming systems in Ca Mau’s production forests has become an end in itself.     

High-resolution mass spectrometry analysis of secondary organic aerosol generated by ozonolysis of isoprene

The chemical composition of secondary organic aerosol (SOA) generated from the ozonolysis of isoprene (C₅H₈) in the presence of an OH scavenger was examined using high-resolution electrospray ionization mass spectrometry (ESI-MS) in the mass range m/z = 50–1000. The chemical composition of SOA is complex, with more than 1000 assigned peaks observed in the positive and negative ion mode spectra. Only a small fraction of peaks correspond to known products of isoprene oxidation, such as pyruvic acid, glycolic acid, methylglyoxal, etc. The absolute majority of the detected peaks correspond to highly oxidized oligomeric constituents of SOA, with an average O:C molar ratio of 0.6. The corresponding organic mass (OM) to organic oxygen (OO) ratio is 2.4. Approximately 8% of oxygen atoms in SOA are in the form of peroxides, as quantified with an iodide test. Double bond equivalency (DBE) factors, representing the sum of all double bonds and rings, increase by 1 for every 1–2 additional carbon atoms in the molecule. The number of unoxidized CC double bonds is estimated to be less than 10%; the remaining DBE is due to CO carbonyl groups. Kendrick analysis suggests that the prevalent oligomer building blocks are small carbonyls with a C₁–C₂ skeleton. Formaldehyde (CH₂O) is identified as the most common repetitive building block in the observed oligomeric compounds.     

Lead (Pb) quantification in potable water samples: implications for regulatory compliance and assessment of human exposure

Assessing the health risk from lead (Pb) in potable water requires accurate quantification of the Pb concentration. Under worst-case scenarios of highly contaminated water samples, representative of public health concerns, up to 71–98 % of the total Pb was not quantified if water samples were not mixed thoroughly after standard preservation (i.e., addition of 0.15 % (v/v) HNO₃). Thorough mixing after standard preservation improved recovery in all samples, but 35–81 % of the total Pb was still un-quantified in some samples. Transfer of samples from one bottle to another also created high errors (40–100 % of the total Pb was un-quantified in transferred samples). Although the United States Environmental Protection Agency’s standard protocol avoids most of these errors, certain methods considered EPA-equivalent allow these errors for regulatory compliance sampling. Moreover, routine monitoring for assessment of human Pb exposure in the USA has no standardized protocols for water sample handling and pre-treatment. Overall, while there is no reason to believe that sample handling and pre-treatment dramatically skew regulatory compliance with the US Pb action level, slight variations from one approved protocol to another may cause Pb-in-water health risks to be significantly underestimated, especially for unusual situations of “worst case” individual exposure to highly contaminated water.     

Atmospheric heavy metal deposition in Northern Vietnam: Hanoi and Thainguyen case study using the moss biomonitoring technique,INAA and AAS

Background, aim, and scope  

The moss technique is widely used to monitor atmospheric deposition of heavy metals in many countries in Europe, whereas this technique is scarcely used in Asia. To implement this international reliable and cheap methodology in the Asian countries, it is necessary to find proper moss types typical for the Asian environment and suitable for the biomonitoring purposes. Such a case study was undertaken in Vietnam for assessing the environmental situation in strongly contaminated areas using local species of moss Barbula indica.     

Indoor air pollution levels in public buildings in Thailand and exposure assessment

Levels of pollutants including PM2.5 and PM2.5 composition (black carbon and water soluble ions), SO(2), NO(2), CO, CO(2), and BTEX (benzene, toluene, ethylbenzene, xylene) were monitored for indoor and outdoor air at a university campus and a shopping center, both located in the Northern suburb of Bangkok. Sampling was done during December 2005-February 2006 on both weekdays and weekends. At the university, indoor monitoring was done in two different air conditioned classrooms which shows the I/O ratios for all pollutants to be below 0.5-0.8 during the weekends. However, on weekdays the ratios for CO(2) and most detected BTEX were above 1.0. The concept of classroom occupancy was defined using a function of the student number in a lecture hour and the number of lecture hours per day. Classroom 2, which had a higher occupancy than classroom 1, was characterized by higher concentrations of most pollutants. PM2.5 was an exception and was higher in classroom 1 (37 microg/m(3), weekdays) as compared to classroom 2 (26 microg/m(3), weekdays) which was likely linked to the dust resuspension from the carpeted floor in the former. Monitoring was also done in the shopping mall at three different sites. Indoor pollutants levels and the I/O ratios at the shopping mall were higher than at the university. Levels of all pollutants measured at the car park, except for toluene and CO(2), were the highest. I/O ratios of the pollutants at the mall were above 1.0, which indicates the relatively higher influence of the indoor sources. However, the black carbon content in PM2.5 outdoor is higher than indoor, which suggest the important contribution from outdoor combustion sources such as the traffic. Major sources of outdoor air pollution in the areas were briefly discussed. Exposure modeling was applied using the time activity and measured pollutant concentrations to assess the exposure of different groups of people in the study areas. High exposure to PM2.5, especially for the people working in the mall, should be of health effect concern.     

On-site rainwater harvesting and treatment for drinking water supply: assessment of cost and technical issues

Environmental Science and Pollution Research - This study assessed the performance of rainwater-harvesting systems installed for selected public utilities in the northern provinces of Vietnam where...